Highsider LED Daytime Running Light "PENTA" - Black

HIGHSIDER LED daytime running light PENTA

The LED daytime running light with 5 power LEDs and parking light function ensures good perception of bikers by other road users.
Packed in a matt black rectangular aluminium housing, the daytime running light is manufactured for universal mounting.

With this daytime running light, the light switches to dimmed parking light mode (position light) when you switch to low beam. E-approved.

See and be seen give your bike personality! The fancy design and perfect technology of the HIGHSIDER headlight series make you a
sensational highlight!

Dimensions:
Width: 170 mm
Height: 37 mm
Depth: 61 mm

Technical specifications:
Power consumption daytime running light: at 12.5 volts max. 0.4 amperes (corresponds to approx. 5 watts)
Power consumption parking light function: at 12.5 volts approx. 0.08 amperes (corresponds to approx. 1 watt)
connections:
Black cable = ground (-)
Red cable = plus (+), is connected to switched plus (ignition).
White cable = control line, is connected to the plus line of the parking light.

Scope of supply: 1 piece


Note 1 - with existing light switch:
The operation of the HIGHSIDER LED daytime running light requires a manually switched dipped beam via a light switch.
The daytime running light must be connected in such a way that it switches off automatically when the main headlamp is switched on (exception: function of the headlamp flasher) or is dimmed.
The rear tail light must always remain switched on, i.e. be connected to ignition plus.

Caution: Any other parking lights/front position lights present on the vehicle must be disconnected, as a maximum of 2 parking lights may be used on the vehicle.


Note 2 - without light switch present:
The daytime running light can also be used on vehicles without light switch. The following components, for example, are required:
Switch: Art. No. 240-044
HIGHSIDER DRL CONTROL- BOX CB1 : Art. No. 208-108 (switches between low beam and daytime running light)